Egyszerű kezelhetőségük miatt a hagyományos webkamerákat gyakran használják egyes gépi látási alkalmazásokhoz is. A felhasználók azonban jól tudják, hogy ezeknek a vonzó árú...
Opto Engineering – EN5MP sorozat
Az EN5MP sorozat nagy felbontású fix fókusztávolságú optikák sorozata, amelyeket gépi látási alkalmazásokhoz terveztek.A fókusztávolságok nagy választéka többféle lehetőséget biztosít a látómező és a munkatávolság tekintetében különböző rendszerkonfigurációk kialakításánál.
A nagy felbontású kamerákkal és a megfelelő megvilágítással együtt az EN5MP objektívek lehetővé teszik nagy felbontású látórendszerek tervezését összetett vagy kritikus feladatok megoldására: pl. OCR/OCV, robotvezérlés, kritikus minták, például csatlakozók, elektronikus alkatrészek, fiolák stb. vizsgálatát. Az Opto Engineeringnél® időt és pénzt takaríthat meg azáltal, hogy megfelelő objektívet, kamerát és megvilágítást is tartalmazó csomagmegoldásokat választja, amelyek az alkalmazási követelményekhez és a minták típusához vannak optimalizálva.
.
Opto Engineering – EN5MP sorozat SPEC
Alkalmazási útmutatók
Clock comparison
When applications involve the processing of image material from multiple cameras, the precise time or the correct chronological sequence of the image recordings is often important for...
How to acquire images in HALCON with an IDS GigE Vision camera
This application note shows how to acquire images with an IDS GigE Vision camera and the HALCON machine vision software. Because the HALCON installation brings its own GigE Vision...
FPN calibration (UI-3130CP Rev. 2, UI-3140CP Rev. 2, UI-3160CP Rev. 2, and UI-3180CP Rev. 2)
How can you calibrate ON Semiconductor PYTHON sensors in IDS industrial cameras that are not factory-calibrated? Some of these sensors have a fixed-pattern noise (FPN) which causes...
Rapid Prototyping with HALCON Embedded: Code Reading with Raspberry Pi and IDS camera
Just quickly test an embedded image processing application? This task does not have to fail upon the complex cross compiling of source code. Fast and easy setup proof of concepts on...
USB 3 uEye CP Rev. 2: Internal image memory from driver version 4.80 on
This application note describes the changes from driver version 4.80 on when using the internal image memory of the USB 3 uEye CP Rev. 2. More info Source: IDS Imaging Development...
Acquire images with NI Vision Software from a U3V camera
This application note shows you how to acquire images with IDS USB3 Vision cameras in combination with the NI Measurement & Automation Explorer (NI MAX) and NI Vision Builder for...
Synchronizing image acquisition with uEye cameras
Many high precision applications in machine vision require multiple cameras to capture frames synchronously. This application note will outline the methods available to synchronize...
Assembly of ferrites on USB cables
In a noisy industrial environment the usage of ferrites can improve the fail safeness of USB cables. More info Source: IDS Imaging Development Systems GmbH
IDS Software Suite – silent setup
A normal (non-silent) setup receives all necessary input from the user by clicking at dialog boxes. A silent setup does not prompt the user for input but gets its input from a...
Temperature dependency of image quality
This application note is related to all uEye CCD models (series UI-2xxx, UI-6xxx) and explains the dependency between image quality and temperature. More info Source: IDS Imaging...
Acquire images in NI Vision Builder AI from an uEye
This application note shows how to acquire images not with the MAX, but with the NI Vision Builder AI. This NI Vision Builder is not a free tool and needs to be activated with a NI...
Whitepaper
Novel vision app-based sensors and cameras: Customized, highly flexible vision solutions
With the IDS NXT vegas, IDS Imaging Development Systems GmbH launches a new generation of devices that handle image processing tasks autonomously and support a PC application with...
Machine Vision Standards – Interchangeability or Compatibility?
The emergence of machine vision standards has led to the industry agreeing on cooperation in an unprecedented way. This should simplify and shorten the design-in phase for cameras in...
Stay connected with USB 3.1 – The next generation standard camera interface
In previous generations USB was only a data interface, capable of supporting limited power for a device. With the USB 3.1 specification the USB implementers forum (USB-IF) has...
Don’t lose your connection – Why it makes sense to switch to USB 3.0 now
In industrial environments, everything revolves around reliability, productivity and stability. Processes and equipment are subject to numerous certifications. Changes are planned and...
Focus-Tunable Lenses Enable 3-D Microscopy
Microscopy beginners may be perplexed when they notice that parts of a sample that appear only marginally out of focus often look much more blurred in an image. The depth of field as...
Obtaining Depth Information from Stereo Images
This paper gives an overview of the main processing steps for depth perception with a stereo camera. After a description of the general techniques, we discuss the specifics of the...
High Dynamic Range Imaging: Images and Sensors
In the past, technological development in the image sensor field primarily strove to increase resolution by adding pixels. The current generation of digital cameras already offer...
USB 3.0 – Background Factors, New Features, and Applicability as a Camera Interface
In November 2008, the specification for "SuperSpeed USB" was presented and marked an improved and, above all, considerably faster version of the popular interface. New features on the...
Programozási példák
IDS sherpa: How to switch an application from IDS Software Suite to IDS peak
The example "IDS sherpa" explains for experienced users of the IDS Software Suite how programming code under MFC has to be adapted for using the IDS peak SDK. Using reference...
Getting started: uEye SDK and C
This samples describes step-by-step how to set up a simple console application for controlling a uEye camera. Here, the uEye SDK for C is used. More info Source: IDS Imaging...
Getting started: uEye .NET SDK and C#
This sample shows how to create a C# project with the uEye .NET SDK. It includes also a simple single grab sample for an easy start on programming uEye cameras. More info Source: IDS...
Getting started: uEye .NET SDK and Visual Basic
Besides a simple example for a single grab, this example also includes a step-by-step guide on how to set up a Visual Basic project with the uEye.NET SDK. More info Source: IDS...
Simple live – image acquisition with the Python interface PyuEye
This sample shows the basic idea how to continuously capture images using the PyuEye interface in combination with OpenCV. In addition to initializing the camera, information about...
Getting started on Linux with uEye SDK and Qt Creator
This sample shows how to setup a new project in Qt Creator and do a simple image acquisition with an IDS camera under Linux. The prerequisite is that the IDS Software Suite and Qt5...
Image Acquisition with the uEye image queue in C/C++
This sample is based on the uEyeImageQueue demo. In the processing part of the image queue thread, you can run different types of crop operations. All these operations are executed...
Image Acquisition with the uEye image queue in .NET C#
This sample is based on the uEyeImageQueue demo. In the processing part of the image queue thread, you can run different types of crop operations. All these operations are executed...
Crop operations on software side (C/C++)
This sample shows the basic idea of continuously capturing images without losing frames. A ring image buffer sequence with at least 3 buffers is used. These buffers are put into the...
Multicast mode for GigE uEye cameras
This programming sample demonstrates how to generally configure the multicast mode of an IDS GigE uEye camera and how to use the multicast feature as client. Besides initialization...
UEye .NET C# – GPIO with master and slave cameras
This sample shows how to synchronize the image acquisition of two cameras by using the PWM (pulse width modulation) output of the master camera. Both cameras (master and slave) are...
UEye .NET C# – image sequences
This sample shows how to acquire images in DIB-mode and put them into a sequence of image buffers. The sequence consists out of 10 buffers. The sample shows how to allocate the...
METALLURGIAI
mikroszkóp
NYÁK
mikroszkóp
KOEXTRUZIÓS
mikroszkóp
ÉKSZERÉSZ
mikroszkóp
KAPCSOLAT
Elérhetőségeink